Hydraulic Sheet Metal Bending Machine 600T

Estimate bending force calculation formula is

P=650*S*S*L/V

• P: Estimate Hydraulic press Brake Bending force (T)
• S: Plate thickness (mm)
• L: Bending Length (m)
• V: Hydraulic Press Brake Bottom die V opening width (mm)

NOTE:

1. The CNC Hydraulic Sheet Bending Machine bending force calculation is based on mild steel (tensile strength = 450Mpa). For other material, we shall time constant K (related with material tensile strength, hardness, elongation). for example, Stainless plate characters can be different according to plate number. we can set K=1.5.
2. Normally V (CNC Hydraulic Sheet Bending Machine bottom die V opening width) can be 6 ~12 times plate thickness. for thin plate we select smaller V opening. while for bigger and Harder plate, we shall set bigger V opening. Bigger V will introduce bigger bending radius.

• The CNC Hydraulic Sheet Metal Bending Machine will be loaded over steel rack. During loading / unloading, we shall pull or push only over the steel rack to avoid deforming on machine body frame.
• On Machine wall frame, there are lifting hook. We shall use enough length steel wire rope or chain to lift the machine by the hook. We shall be careful to avoid machine drop down;
• For bigger capacity CNC Hydraulic Sheet Metal Bending Machine, the machine height can be close to container door top. when we pull machine out, we shall be careful to avoid damage on machine top parts. To protect the parts, we may remove hydraulic valve, motor or other components on top. Please reinstall the parts according our guide.
• The CNC Hydraulic Sheet Metal Bending Machine will be fixed by chain or steel wires inside the container, covered with plastic film to avoid moisture during ocean shipment.
• When receive the CNC Hydraulic Sheet Metal Bending Machine, Customer shall remove the steel rack under the machine, prepare foundation for the machine. Good fix and levelling will make machine work longer and accurate.